YOKOGAWA TA320 User Manual Download Page 117

Page: 117 / 144

11-5

IM 704210-01E

Troubleshooting and Maintenance

11.4 Executing the Self-test

P r o c e d u r e

• To exit from the current menu, press any of the top menu keys or press the ESC touch key

displayed on the screen.

UTILITY Top Menu

MODE

FUNCTION

DISPLAY

SAMPLE

INPUT

UTILITY

Displays the self-test menu.

Selects the UTILITY menu.

Press the UTILITY key to display the UTILITY top menu.

Press the NEXT touch key to display NEXT 1/3 on the key.

Press the SELF TEST touch key to display the self-test menu.

Selecting board test

Press the BOARD TEST touch key to highlight BOARD TEST.

• Executing board test

Press the EXEC touch key. The board test will start and the results will be displayed. When

the board test is completed, the ESC touch key will appear. If PASS does not appear for

each test item, the instrument is faulty.

• Returning to the self-test menu

Press the ESC touch key to return to the self-test menu.

Selecting key/rotary knob test

Press the KEY TEST touch key to highlight KEY TEST.

• Executing key/rotary knob test

Press the EXEC touch key. The key/rotary knob test will start and the front panel view will

appear on the screen.

Press each front panel key to check that the corresponding area highlights. Turn the rotary

knob to check that the rotary knob icon rotates.

• Returning to the self-test menu

10. Press the ESC touch key to return to the self-test menu.

Selecting touch key test

11. Press the TOUCHKEY TEST touch key to highlight TOUCHKEY TEST.

• Executing touch key test

12. Press the EXEC touch key. Numbers 1 to 60 will appear on the screen.

13. Press each number to check that it highlights.

• Returning to the self-test menu

14. Press an any front panel key to return to the self-test menu.

Selecting display test

15. Press the DISPLAY TEST touch key to highlight DISPLAY TEST.

• Executing display test

16. Press the EXEC touch key. The entire screen will become bluish. Check that there are no

white spots on the screen.

17. Use the arrow keys or rotary knob to check that the contrast changes accordingly.

• Returning to the self-test menu

18. Press an any front panel key except the arrow keys to return to the self-test menu.

Self-test menu

Selects board
test.

Selects key/
rotary knob test.

Selects
display test.

Executes test.

Selects touch
key test.

Summary of Contents for TA320

















































































































































Search results

Summary of Contents for TA320

Reviews:

Related manuals for TA320

Brands by name

Popular brands

YOKOGAWA TA320, User Manual

Search results

Summary of Contents for TA320

Reviews:

Related manuals for TA320

Brands by name

Popular brands