manualshive.com logo in svg

YOKOGAWA TA320, User Manual

Share
Download
YOKOGAWA TA320 User Manual Download Page 33

3-4

IM 704210-01E

3.3 Connecting the Power Cord

Before Connecting the Power

Make sure that you observe the following points before connecting the power.  Failure to do so

may cause electric shock or damage to the instrument.

WARNING

• Make certain that the power voltage of your outlet matches the instrument’s rated power

voltage.

• Be sure that the instrument’s power switch is OFF.

• Be sure that your power cord has been supplied by Yokogawa specifically for use with

this instrument.  Use of an inappropriate cord may present a shock or fire hazard.

• Always use protective ground to prevent electric shock.  Connect the instrument’s power

cord to a 3-pin AC outlet with grounding terminal.

• Never use an extension cord that does not have a protective grounding, otherwise the

protection feature will be invalidated.

Connecting the Power Cord

1.

Make sure that the POWER switch located on the front panel is turned OFF.

2.

Plug the power cord into the power connector socket on the rear panel of the instrument.

3.

Plug the other end of the power cord into a 3-pin AC outlet that meets the following

conditions.

Rated supply voltage: 100 to 240 VAC

Permitted voltage range: 90 to 264 VAC

Rated power frequency: 50/60 Hz

Permitted power frequency range: 48 to 63 Hz

Maximum power consumption: 125 VA

3-pin AC outlet

Power cord
 (supplied with
 the instrument)

Summary of Contents for TA320

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands