manualshive.com logo in svg

YOKOGAWA TA320, User Manual

Share
Download
YOKOGAWA TA320 User Manual Download Page 66

7-4

IM 704210-01E

Setting readout parameters

• Turning marker display ON/OFF

• ON  :  Displays the markers.

• OFF :  Displays no markers.  X1 MARKER, X2 MARKER and MOVEMENT touch keys are

also not displayed.

• Movable range of X1 marker

The X1 marker can move about within the window, as long as it is located on the left of X2

marker.  (They can be located in the same position.)

• Movable range of X2 marker

The X2 marker can move about within the window, as long as it is located on the right of X1

marker.  (They can be located in the same position.)

• Selecting the marker speed

•

: Causes the markers to move within the window every dot.

•

: Causes the markers to move within the window every 5 dots.

X1 marker

X2 marker

Window

X1: X-axis coordinate of X1 marker
Y1: Y-axis coordinate of X1 marker (frequency of X1)
X2: X-axis coordinate of X2 marker
Y2: Y-axis coordinate of X2 marker (frequency of X2)
N:
 • WINDOW calculation area: Total number of samples 
    present within the window.
 • MARKER calculation area:  Number of samples present 
    between X1 and X2 markers.

Note

With a certain center value and span of X-axis, markers may be located in an area which does not actually

exist.  For instance, if the center value of X-axis is set to 10 ns and span of X-axis is set to 3.2 

µ

s, the

window will contain minus measurement data area.  If the markers are located in this area, asterisks “*”

will be displayed instead of the X-axis coordinates.

Setting the calculation function

• Selecting the area

Select WINDOW or MARKER.  The item indicated by “N” at the bottom of the screen varies

according to the selected calculation area.

• Setting constant T

Setting range: 10 to 999.9 ns

• Selecting the polarity to be used for display/statistical computation

This menu is displayed only if 

 is selected for pulse width measurement.  Select the desired

polarity from the following to be used for display (histogram, time variation) or statistical

computation.

•

: Displays or performs statistical computation for the positive side only.

•

: Displays or performs statistical computation for the negative side only.

•

: Displays or performs statistical computation for the both positive and negative sides.

However, computation will be performed for the standard deviation and jitter1 only.  For

details, refer to 7-7.

7.1 Setting the Histogram Display Function and Reading the Data (Readout)

Summary of Contents for TA320

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands