2. Transportation, Storage and Installation
2-27
TI 33J01J10-01EN
Oct. 5, 2018-00
SEE
ALSO
For the screw mounting dimensions for wall mounting, refer to the General Specifications (GS) for the
corresponding device.
l
Grounding
Ground the equipment using the functional grounding terminal provided on the base plate.
Even if there is electrical conduction between the base plate and wall surface via the mounting
screws, the equipment must be grounded using the functional grounding terminal.
l
Insulation from a wall (Node Interface Unit A2NN10D)
To prevent noise from coming into the device through the wall, attach insulating bushings to the
brackets on the 19-inch rack mountable node interface unit so that the unit does not directly
touch the wall. Insulating bushings are supplied as accessories.
l
Installation Orientation
Mount the device to the DIN rail with the screws in the vertically correct orientation. Check the
installation orientation in General Specifications (GS).
Summary of Contents for CENTUM CS
Page 2: ...Blank Page...
Page 246: ...Blank Page...