YOKOGAWA CENTUM CS, Technical Information

Page: 251 / 253

v
TI 33J01J10-01EN Mar. 29, 2019-00
revised]
l
EMC Conformity Standards [EN 61326-1 was added][Note was revised]
l
Standards for Hazardous Location Equipment [ATEX Typei and IECEx were
added]
n
Installation Environment Specifications
Table Equipment Installation Specifications [A2BN5D was added] [Electric
field of N-IO was corrected]
1.6 Cabling Requirements
n
Ambient Temperature [A2BN5D was added]
1.7 Corrosive-gas Environment Compatibility
Table G3 Environment-compatible Products [A2BN5D was added]
2. Transportation, Storage and Installation
2.5 Installation
2.5.3 19-inch Rack Mount Devices [CAUTION was revised]
2.5.4 DIN Rail Mountable Devices [A2BN5D was added]
2.5.5 Wall Mountable Devices [A2BN5D was added]
2.5.6 Example of Mounting to General Purpose Cabinet/Junction Box [A2BN5D was added]
3. Cabling
3.1 Cables and Terminals [A2BN5D was added] [
n
Bending radius of cable was added]
n
Signal Cables [An error of “For N-IO Node” was corrected]
n
Power Cables [Barrier for Base Plates were added][Value was corrected]
n
Grounding Cables [Barrier Base Plates were added]
3.2 Connecting Power
n
Terminal Connection [A2BN5D was added] [Base Plate of A2BN3D was revised]
3.4 Power and Ground Cabling [A2BN5D was added]
n
A2NN30D Node Interface Unit
Figure Connecting Power Supply with Node Interface Unit [An error of the size of the
screw was corrected] [A2BN5D was added]
n
A2BN3D Base Plate for Adaptor [The caption was added]
n
A2BN4D Base Plate for Barrier [The cable length restriction was added]
n
Connecting Power Supply with Node Interface Unit and I/O Units
[A Screw size of NIU was corrected] [Important information was added]
n
Example of Sytem Cabinet Installation and Grounding Wiring
Figure N-IO system devices installation and grounding wiring (Cabinet) [A Screw size
of NIU was added]
3.5 Connecting Signal Cable
n
Process I/O Signal Connection
l
Pressure Clamp Terminal, Spring Clamp Terminal (for N-IO Node)
Table Applicable Interface [A2BN5D was added]
n
Connecting Signal Cables to Terminals (for N-IO)
Figure Example of Node Interface Unit and I/O Unit Cable Wiring (Cabinet) [The
caption was revised]
Figure Example of Node Interface Unit and I/O Unit [The leader line was
corrected
n
Routing Signal Cables (for FIO)
l
FIO with KS Cable Interface Adaptor Cabling [Minimun bending radius was
added]
3.6 Connecting Signal Cables with Fieldnetwork I/O (FIO)
3.6.2 List of Signal Cables for Connection with FIO [Important information was added]
3.7 Signal Connections of N-IO I/O Unit
3.7.1 N-IO I/O Unit Types [A2BN5D was added]
3.7.2 Base Plate for Adaptor
n
Connecting Signal Cables with N-IO I/O Unit
Table Terminal Numbers and Signal Types (A2BN3D) [An error of A2SDV506
was corrected]
3.7.4 Base Plate for Barrier [A2BN5D was added]
3.8 Connecting Bus Cable
n
F-SB Bus (for N-IO Node) [Important information was added]
4. Installation Specifications
n
Electrical Specifications
Table Electrical Specifications [A2BN4D and A2BN5D were added]
n
Maximum Power Consumption of FIO [A2EN402 and A2EN404 were added]