YOKOGAWA CENTUM CS, Technical Information

Page: 23 / 253

1. System Installation Requirements
1-11
TI 33J01J10-01EN
n
Installation Environment Specifications
The following table lists environmental requirements for the installation of the CENTUM VP system:
For environmental requirements for devices including PC and UPS, refer to their environmental
specifications.
SEE
ALSO
For details, refer to the hardware general specifications (GS) for each equipment.
Table Equipment Installation Specifications (1/2)
Item
Specifications (except
for ANB10

, ANB11

,
and ANT10U)
Specifications
(ANB10

, ANB11

and ANT10U)
Specifications
(N-IO node)
(*1)
Remarks
Temperature
Normal operation
0 to 50 °C
0 to 60 °C
(Temperature option: –20
to 70 °C) (*2)
0 to 60 °C
(Temperature option: –40
to 70 °C) (*4) (*5)
Avoid direct
sunlight.
Transportation/
storage
–20 to 60 °C
–20 to 60 °C
(Temperature option: –40
to 85 °C) (*3)
–20 to 60 °C
(Temperature option: –40
to 85 °C) (*5)
Avoid direct
sunlight.
Humidity
Normal operation
10 to 90 %RH
(In case of FIO / 5 to 95
%RH)
5 to 95 %RH 5 to 95 %RH No condensation
Transportation/
storage
10 to 90 %RH
(In case of FIO / 5 to 95
%RH)
5 to 95 %RH 5 to 95 %RH No condensation
Temperature
fluctuation
Normal operation
Within ±10 °C/h Within ±10 °C/h Within ±10 °C/h –
Transportation/
storage
Within ±20 °C/h Within ±20 °C/h Within ±20 °C/h –
Power
source
Voltage range
100-120 V AC ±10 %
220-240 V AC ±10 %
24 V DC ±10 %
(including ripple)
100-120 V AC ±10 %
220-240 V AC ±10 %
24 V DC ±10 %
(including ripple)
100-120 V AC -15 %
+10%
220-240 V AC -15 %
+10%
24 V DC -15% +20% (*6)
–
Frequency 50/60 ±3 Hz 50/60 ±3 Hz 50/60 ±3 Hz –
Distortion factor
10 % or less 10 % or less 10 % or less –
Peak value
125 V or larger
(for 100-120 V AC)
274 V or larger
(for 220-240 V AC)
125 V or larger
(for 100-120 V AC)
274 V or larger
(for 220-240 V AC)
118 V or larger
(for 100-120 V AC)
258 V or larger
(for 220-240 V AC)
–
Momentary
failure
20 ms or less
(for 100-120/220-240 V
AC)
20 ms or less
(for 100-120/220-240 V
AC)
20 ms or less
(for 100-120/220-240 V
AC)
With rated voltage
supplied
Withstanding
voltage
1500 V AC for 1 minute
(for 100-120/220-240 V
AC)
500 V AC for 1 minuite
(for 24 V DC)
1500 V AC for 1 minute
(for 100-120/220-240 V
AC)
500 V AC for 1 minuite
(for 24 V DC)
1500 V AC for 1 minute
(for 100-120/220-240 V
AC)
42 V DC cobtubyiys
500 V AC for 1 minuite
(for 24 V DC)
Between power
and grounding
terminals
Oct. 5, 2018-00
*1: Except for equipment for RIO System Upgrade. For specification of RIO System Upgrade, refer to the GS 33J64E10-01EN.
*2: When an AAP149, AAP849, ADV161, ADV561, ADV859, ADV159, ADV559, ADV869, ADV169, ADV569, ALR111, ALR121-

0, ALR121-

1, ALE111-

0, ALE111-

1, ALF111, ALP111 and ALP121 is installed, the ambient temperature should range from 0 to 50 C.
*3: When for use as a N-IO node, the installation environment must be within the temperature specification range of the communication module
to be incorporated.
*4: For A2BN4D and A2BN5D, use within the range of -20 to 60°C.
*5: To use A2BN4D or A2BN5D at -20 to 0°C, specify the temperature environment support option for the I/O modules to be mounted. The
environment in which A2BN4D or A2BN5D is used depends on the specifications of the barrier mounting to A2BN4D or A2BN5D.
To use A2BN3D with the temperature environment support option (at -40 to 70°C), specify the temperature environment option for
the I/O modules and I/O adaptor as well. For the cable connector connection of Base plate for analog digital I/O (A2BN3D-

9), the
normal operation temperature is -20 to 70°C depend on the temperature specification of the dedicated cable.
To maintain A2NN30D with the temperature environment support option (at -40 to 70°C), specify the temperature environment
support option for the power supply units and N-ESB bus modules as well.
*6: For A2BN3D, 24 V DC ±10%. For A2BN4D and A2BN5D, 24 V DC −14% +10%.