4.5 Routine Maintenance
Notes before Storage
Wipe the instrument off with a cloth to remove dust, fingerprints, and other dirt.
For instructions on how to clean the exterior of the instrument, see “Cleaning the Frame
Controller and Modules.”
Carry out the condition check (fan alarm) and key check to confirm that the instrument
operates correctly. For details, see section 10.7 in IM 735101-03E.
Notes When Re-Using the Instrument
When using the instrument again after storing it for a long period of time, first check that
it operates correctly. Check that it operates correctly in the same way that was outlined
above in the section “Notes before Storage.”
Cleaning the Frame Controller and Modules
To use this instrument for as long as possible and to prevent problems or malfunctions,
routine maintenance is necessary.
• When cleaning the case or the operation panel, first remove the power cord from the
outlet, and then wipe with a dry, soft, clean cloth.
• To clean the electrical interface, use compressed air to remove dust, and then cover
unused output terminals with terminators and unused input terminals with caps.
CAUTION
Failure to comply with the following precautions may cause the instrument to
malfunction.
• Turn the instrument off before starting maintenance.
• Do not use chemicals such as thinner, benzene, or alcohol.
Doing so may cause discoloration and deformation.
French
ATTENTION
Le non-respect des précautions suivantes risque ce provoquer des
dysfonctionnements de l’instrument.
• Mettre l’instrument hors tension avant la maintenance.
• Ne pas utiliser de produits chimiques (par exemple, diluants, benzène ou alcool)
pour éviter toute décoloration ou déformation.
4-27
IM 735101-01EN
Troubleshooting, Maintenance, and Inspection
1
2
3
4
5
Index
