Using the Trigger Terminal to Generate a Reference Clock for
Synchronizing Multiple Instruments
Make the following connections if you want to use the trigger terminal to synchronize
multiple instruments.
MASTER
SLAVE
TRIGGER OUT
REF CLK IN
Coaxial cable
Using the XFP Interface
Make the following connections between the BERT and the XFP interface if you want to
use the XFP optical transceiver as the DUT.
AQ2200-641
XFP INTERFACE MODULE
REF CLOCK IN
(FROM TRIGGER OUT)
DATA OUT
(TO DATA IN 1)
DATA IN
(FROM DATA OUT)
DATA OUT
DATA IN
(FROM DATA OUT)
XFP
Tx
Rx
BERT
XFP INTERFACE
Coaxial cable
Note
Before you install or uninstall the XFP transceiver, turn off the output from the connected
AQ2200-601.
2.5 Connecting Cables
2-19
IM 735101-01EN
Making Preparations for Measurements
1
2
3
4
5
Index
