manualshive.com logo in svg

YOKOGAWA AQ2200 Series, User Manual

Share
Download
YOKOGAWA AQ2200 Series User Manual Download Page 137

4.7 Calibration

Periodic calibration is an effective means of keeping the instrument performing correctly 
for a long time and of detecting malfunctions at an early stage.
We recommend that you calibrate this instrument at least once a year.

•  Calibration of the AQ2200-111
  Due to the properties of the semiconductors (semiconductor lasers) that the AQ2200-

111 uses, the actual wavelength may deviate from the specified wavelength over time.

  To maintain consistent performance, calibrate and adjust the instrument once every 

six months.

  If YOKOGAWA calibrates the instrument, we can also perform adjustments as 

requested.

  If you calibrate the instrument, you can adjust it by entering the correction values that 

you obtained from the calibration into the instrument’s CAL_Offset

4.8  Disposing of the Instrument

When disposing of the instrument, follow the laws and ordinances of your country or 
region.

4-35

IM 735101-01EN

Troubleshooting, Maintenance, and Inspection

1

2

3

4

5

Index

Summary of Contents for AQ2200 Series
























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands