manualshive.com logo in svg

YOKOGAWA AQ2200 Series, User Manual

Share
Download
YOKOGAWA AQ2200 Series User Manual Download Page 167

5.20  AQ2200-421 OSW Module

Performance and Functional Specifications

Item

Specifications

Optical fiber

-SA

-G5

-G6

Port configuration

1×2 (when the port configuration specification is -21)

2×2 (when the port configuration specification is -22)

Wavelength

1310 nm/1550 nm

850 nm/1310 nm

Insertion loss

 3,  5

1.0 dB (typical)

 1,  4

1.0 dB (typical)

 2

Repeatability

 3,  6

± 0.01 dB or less

 1

± 0.01 dB or less

 2

Crosstalk

–50 dB or less

 1,  4

–50 dB or less

 2

Optical return loss

45 dB or greater

 1, 4, 7

20 dB or greater

 2

Polarization dependence

0.08 dBp-p or less

 4,  8

—

Applicable optical fiber

SMF(ITU-T G.652)

MMF(GI 50/125)

(ITU-T G651.1)

MMF(GI 62.5/125)

(IEC 60793-2)

Optical connector

FC/PC (when the optical connector specification is -FCC)

SC/PC (when the optical connector specification is -SCC)

General Specifications

Item

Specifications

Operating conditions

The same as the frame controller’s operating environment

Temperature and humidity for storage

Ambient temperature

–20 to +60°C

Ambient humidity

20 to 80% RH (no condensation)

External dimensions

31 (W) × 117 (H) × 321.5 (D) mm (excluding protrusions; one slot)

Weight

Approx. 0.7 kg

•  All values in the specifications assume a warm-up period of one hour. Unless otherwise noted, all specified values include 

connectors.

•  For models with MMF specifications, all specified values are guaranteed when a light source that is excited in steady mode is 

used.

1  Wavelength: 1310 ± 15 nm or 1550 ± 15 nm
2  Wavelength: 850 or 1300 nm
3  Ambient temperature: 23 ± 2°C (constant temperature)
4  When using the Yokogawa reference master cord (SMF)
5  Connectors not included. 1.4 dB or less when connectors are included.

6  2 σ

7  When using PC connectors (return loss 48 dB or greater)
8  Wavelength: 1550 ± 15 nm

5-30

IM 735101-01EN

Summary of Contents for AQ2200 Series
























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands