YOKOGAWA AQ2200 Series User Manual Download Page 120

Page: 120 / 183

After the instrument finishes detecting the modules, the DETAIL or SUMMARY screen
appears.

A module has been detected

Note

• An error message may appear immediately after the instrument finishes detecting the

installed modules.

This error shows that, due to a discrepancy between the release version of the firmware

installed in the frame controller and the firmware installed in the module, there is a possibility
that some operations may not work properly.

Please update the firmware if this error appears.
• The instrument takes approximately 5 seconds to automatically detect modules after they

have been installed in the frame controller.

• When you remove the module while displaying a screen other than the DETAIL or

SUMMARY screen, the screen closes and the DETAIL or SUMMARY screen appears.

4.3 Changing Modules

4-18

IM 735101-01EN

Summary of Contents for AQ2200 Series
























































































































































































Search results

Summary of Contents for AQ2200 Series

Reviews:

Related manuals for AQ2200 Series

Brands by name

Popular brands

YOKOGAWA AQ2200 Series, User Manual

Search results

Summary of Contents for AQ2200 Series

Reviews:

Related manuals for AQ2200 Series

Brands by name

Popular brands