YOKOGAWA AQ2200 Series User Manual Download Page 125

Page: 125 / 183

Displaying Instrument Information

Displaying Frame Controller Information

You can display the frame controller’s hardware and firmware information.
Follow the steps below to display this information.

Press

SYSTEM

to display the SYSTEM screen.

Use the arrow keys to select Information, and press the

Select

soft key or

ENTER

The System Information screen appears.

After checking the information, press the

Close

soft key.

Displaying Module Device Information

You can display the device information for the installed modules.

Use the

SLOT

keys to select the module that you want to display device

information for.

Press the

Menu

soft key to display the module control soft keys.

Note

You can carry out this procedure to display the module information for AQ2200-1xx, AQ2200-
2xx, AQ2200-3xx, and AQ2200-4xx modules. You cannot carry out this procedure to display the
module information for AQ2200-6xx modules.

4.4 Updating the Firmware

4-23

IM 735101-01EN

Troubleshooting, Maintenance, and Inspection

Index

Summary of Contents for AQ2200 Series
























































































































































































Search results

Summary of Contents for AQ2200 Series

Reviews:

Related manuals for AQ2200 Series

Brands by name

Popular brands

YOKOGAWA AQ2200 Series, User Manual

Search results

Summary of Contents for AQ2200 Series

Reviews:

Related manuals for AQ2200 Series

Brands by name

Popular brands