YOKOGAWA AQ2200 Series User Manual Download Page 126

Page: 126 / 183

Press the

Information

soft key to display the Module Information screen.

The display will be slightly different depending on the installed modules.

Soft key menu for

interface modules

Head

Info

Module

Info

• Displaying Interface Module Device Information

Press the

Module Info

soft key to display the Module Information screen.

AQ2200-201

Interface Module

Head

Info

Module

Info

• Displaying Sensor Head Device Information

Press the

Head Info

soft key to display the Head Information screen.

AQ2200-231

SENSOR HEAD

Head

Info

Module

Info

Note

If a sensor head is not connected, the Head Info soft key is dimmed and cannot be pressed.

After checking the information, press the

Close

soft key.

4.4 Updating the Firmware

4-24

IM 735101-01EN

Summary of Contents for AQ2200 Series
























































































































































































Search results

Summary of Contents for AQ2200 Series

Reviews:

Related manuals for AQ2200 Series

Brands by name

Popular brands

YOKOGAWA AQ2200 Series, User Manual

Search results

Summary of Contents for AQ2200 Series

Reviews:

Related manuals for AQ2200 Series

Brands by name

Popular brands