manualshive.com logo in svg

YOKOGAWA AQ2200 Series, User Manual

Share
Download
YOKOGAWA AQ2200 Series User Manual Download Page 124

5.

  Press the 

Update Exec

 soft key to update the firmware for the selected modules.

 

 

   

Executing

Note

If you select multiple modules to update, the progress indication is updated for each module. 
One of the following four progress indications is displayed.
•  Executing:  

The firmware update is being executed.

•  File Not Found: 

 The USB memory device does not have the files that are required to 
update the module.

•  Failed: 

 

The firmware update failed.

•  Complete:  

The firmware update completed successfully.

6.

  After the firmware finishes updating, the message “Please Restart System” is 

displayed. Restart the frame controller.

Displaying the Version Information

The procedure to display the version information is the same as that given for the frame 
controller. See page 4-20.

4.4  Updating the Firmware

4-22

IM 735101-01EN

Summary of Contents for AQ2200 Series
























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands