YOKOGAWA AQ1215A User Manual Download Page 51

Page: 51 / 282

2-13

IM AQ1210-01EN

Setting Up the OTDR Feature

App

Index

2.3 Display (OTDR) Conditions

Procedure

Press

MENU

to display the MENU screen.

For details on the MENU screen, see the Getting Started Guide, IM AQ1210-02EN.

Tap

OTDR

to display the OTDR screen.

Press

SETUP

to display the setup screen.

Tap the

OTDR

tab to display the following screen.

Set the total loss calculation method

(Cumul-Loss, Loss between S and E).

Set the ghost cursor

(OFF, ON).

Set the marker mode

(Marker, Line).

Set the distance

unit.

Not displayed when

the suffix code is -HJ.

OTDR tab

Marker information display

(OFF, ON)

Set the total

return loss

(Include END,

Exclude END).

Set the end point

loss display (OFF,

ON).

Select the Cursor

display format

(CROSS(+), LINE(¦ ))

Approximation line display

(OFF, ON)

Set the cumulative loss type.

See page 2-14.

Set the screen zoom direction

(Natural, Legacy).

Set operation restrictions.

See page 2-14.

Set the work completion notice.

See page 2-15.

Summary of Contents for AQ1215A



























































































































































































































































































Search results

Summary of Contents for AQ1215A

Reviews:

Related manuals for AQ1215A

Brands by name

Popular brands

YOKOGAWA AQ1215A, User Manual

Search results

Summary of Contents for AQ1215A

Reviews:

Related manuals for AQ1215A

Brands by name

Popular brands