YOKOGAWA AQ1215A User Manual Download

Page: 102 / 282

5-9

IM AQ1210-01EN

Analyzing Events

App

Index

2 Point Markers

The section distance and section loss between two markers are measured.

Tap the

2 Point Markers

soft key. A soft key menu for the 2 markers method appears.

Turn the

rotary knob

to move the cursor to the analysis start position.

Tap the

soft key. Marker

is displayed at the cursor position.

Turn the

rotary knob

to move the cursor to the analysis end position.

10.

Tap the

soft key. Marker

is displayed at the cursor position.

Marker

The start point is set to the cursor position.

The end point is set to the cursor position.

Analysis start position

Places marker .

Analysis end position

Places marker .

Displays the section

loss (top row) and the

section distance

(bottom row) between

two markers.

Clears both the markers and cursors.

5.1 Analyzing in TRACE Mode

Summary of Contents for AQ1215A



























































































































































































































































































Search results

Summary of Contents for AQ1215A

Reviews:

Related manuals for AQ1215A

Brands by name

Popular brands

YOKOGAWA AQ1215A, User Manual

Search results

Summary of Contents for AQ1215A

Reviews:

Related manuals for AQ1215A

Brands by name

Popular brands