YOKOGAWA AQ1215A User Manual Download

Page: 119 / 282

6-11

IM AQ1210-01EN

Analyzing W

aveforms

App

Index

Presetting Markers

Using 2 Point Markers, 4 Point Markers, or 6 Point Markers (pages 6-6 to 6-9), place markers

on the waveform data.

Tap the

Preset

soft key to display the preset soft key menu.

Registers the markers (e.g., 4 Point Markers)

on the current waveform data.

Select the action (Register, Delete, SetMarker)

Select the action to perform when you tap the or soft key.

Delete:

Deletes the markers registered in preset A or preset B.

SetMarker: Displays the markers registered in preset A or preset B on the waveform.

Displays the information of the markers registered in the preset.

Executes the action

on preset A

Executes the action

on preset B

• Registering Markers

Tap the

Action

soft key to select

Register

10.

Tap the

soft key. The markers applied to the waveform are registered, and the marker

information is displayed on the preset information display screen.

• Setting the Markers Registered in Preset A or Preset B

11.

Display the measurement target waveform data on the data display screen.

12.

Tap the

Action

soft key to select

SetMarker

13.

Tap the

soft key. The markers registered in preset A or preset B are displayed on the

waveform data.

Note

Preset markers exceeding the distance range of the waveform display cannot be applied.

• Deleting the Markers Registered in Preset A or Preset B

Tap the

Action

soft key to select

Delete

10.

Tap the

soft key. The markers registered in preset A or preset B are deleted.

Note

A marker applied to the waveform is not cleared. To delete markers set on the waveform, tap the Delete
Cursor/Marker soft key. See page 6-6.

6.1 Operating Cursors and Markers

Summary of Contents for AQ1215A



























































































































































































































































































Search results

Summary of Contents for AQ1215A

Reviews:

Related manuals for AQ1215A

Brands by name

Popular brands

YOKOGAWA AQ1215A, User Manual

Search results

Summary of Contents for AQ1215A

Reviews:

Related manuals for AQ1215A

Brands by name

Popular brands