YOKOGAWA AQ1215A User Manual Download Page 40

Page: 40 / 282

2-2

IM AQ1210-01EN

Configuring Auto Save (when averaged measurement is complete)

Tap

Auto Save

to display the Auto Save screen.

Set auto save (OFF, ON).

Set the mode (Date, UserDefine).

Select how to specify the save destination

folder. You can set this when auto save is ON.

Set the file name.

See section 2.4.

Set the file type (*.SOR).

The data save format is fixed to waveform data (SOR extension).

Select the destination drive (internal memory, USB memory).

This is displayed when the mode is set to Date, in which case you can set it.

Save destination folder

The current file path is displayed.

This is displayed when the mode is set to User Define.

Displays the file list of the folder displayed in the current file path.

For details on file operations, see section 9.6.

When the mode is set to Date

When the mode is set to UserDefine

2.1 Measurement (Measure) Conditions

Summary of Contents for AQ1215A



























































































































































































































































































Search results

Summary of Contents for AQ1215A

Reviews:

Related manuals for AQ1215A

Brands by name

Popular brands

YOKOGAWA AQ1215A, User Manual

Search results

Summary of Contents for AQ1215A

Reviews:

Related manuals for AQ1215A

Brands by name

Popular brands