YOKOGAWA AQ1215A User Manual Download Page 273

Page: 273 / 282

11-10

IM AQ1210-01EN

Factory Settings Screen

Initializes the settings and deletes data

The setup data will be initialized. Waveform data, image data, and the like in the

USER folder in the instrument internal memory will also be deleted.

Initializes settings

The setup data will be initialized.

Note

• The USERS_MANUAL folder in the USER folder and the PDF user’s manuals in the USERS_MANUAL

folder will not be deleted.

• The time setting will not be initialized.

Explanation

Setup

The setup data will be initialized. Data in the USER folder in the instrument internal memory will not be
deleted.

All

The setup data will be initialized. All data (except the user’s manual) in the USER folder in the
instrument internal memory will not be deleted.

11.5 Factory Default Settings

Summary of Contents for AQ1215A



























































































































































































































































































Search results

Summary of Contents for AQ1215A

Reviews:

YOKOGAWA AQ1215A, User Manual, Page: 273 / 282

Search results

Summary of Contents for AQ1215A

Reviews: