YOKOGAWA AQ1215A User Manual Download Page 222

Page: 222 / 282

8-51

IM AQ1210-01EN

Using the

Application Feature

App

Index

Soft Key Menu (2-Way Trace)

Tap the soft key menu display button. A 2-Way Trace soft key menu appears.

Soft key menu

2-Way Trace Menu

Load analysis waveforms.

Selects the current trace (Trace A, TraceB, Merged)

Select the trace to display on the screen. When Merged is

selected, the event information is combined and displayed.

Combines the waveforms of each direction

Combined with the waveform viewed from the other direction. The

display direction of the trace that is not the current trace is reversed.

• Loading Analysis Waveforms

Clears the waveforms of Trace1 to Trace2

When tapped, a file operation screen appears, and

you can load waveforms. See section 9.4.

8.5 Performing Advanced Analysis (Advanced Analysis)

Summary of Contents for AQ1215A



























































































































































































































































































Search results

Summary of Contents for AQ1215A

Reviews:

Related manuals for AQ1215A

Brands by name

Popular brands

YOKOGAWA AQ1215A, User Manual

Search results

Summary of Contents for AQ1215A

Reviews:

Related manuals for AQ1215A

Brands by name

Popular brands