Yealink T48S Skype For Business Edition, User Manual

Page: 55 / 254

Getting Started
53
The phone status is displayed on the first page of the web user interface.
Basic Network Settings
In order to use your phones, you must set up basic network. You can use DHCP or configure a
static address to connect your phone to the network. If your phone cannot contact a DHCP
server, you need to configure network settings manually. The phone can support either or both
IPv4 and IPv6 addresses.
Note
Configuring the DHCP
You can configure DHCP for IPv4 or IPv6. The following takes IPv4 as an example:
To configure the DHCP via phone user interface:
1.
Tap
Menu->Setting
->
Advanced
(default password: admin) ->
Network
->
WAN Port
.
2.
Select the desired value (
IPv4
,
IPv6
or
IPv4 & IPv6
) from the pull-down list of
IP Mode
.
3.
Tap
IPv4
.
4.
Select
DHCP
from the pull-down list of
Type
.
5.
Tap to accept the change.
If you want to configure DHCP for IPv6, select
IPv6
or
IPv4 & IPv6
from the
IP Mode
in the
step 2.
DHCP is configurable via web user interface at the path
Network
->
Basic
.
The wrong network settings may result in inaccessibility of your phone and may also have an
impact on your network performance. For more information on these parameters, contact your
system administrator.