Yealink T48S Skype For Business Edition, User Manual

Page: 195 / 254

Advanced Phone Features
193
To configure multicast listening addresses via web user interface:
1.
Click on
Directory
->
Multicast IP
.
2.
Select the desired value from the pull-down list of
Paging Barge
.
3.
Select the desired value from the pull-down list of
Paging Priority Active
.
4.
Enter the multicast IP address(es) and port number (e.g., 224.5.6.20:10008) which the
phone listens to for incoming RTP multicast in the
Listening Address
field.
5.
Enter the label in the
Label
field.
Label will appear on the touch screen when the phone receives the multicast RTP stream.
6.
Click
Confirm
to accept the change.
Note
Using Multicast Paging
To send RTP stream via the paging list:
1.
Do one of the following to send RTP stream
:
-
When the phone is idle, tap or tap
Menu
->
Setting
->
Features
->
Paging List
.
-
During a call, tap -> .
The priorities of listening addresses are predefined: 1 is with the highest priority, while 10 is with
the lowest.
Multicast listening addresses are configurable via web user interface only.