Yealink IP Phones Auto Provisioning Guide
224
Parameter
Permitted
Values
Descriptions
Web Setting Path
The default value is 1.
features.text_message_popup.enable
0 or 1
It enables or disables the IP phone to display
the pop-up message when the phone
receives a new text message.
0-Disabled
1-Enabled
The default value is 1.
Features->Notification
Popups->Display Text Message
Popup
features.relog_offtime
Integer from 1
to 1000
It configures the timeout interval (in minutes)
for web access authentication.
Example:
features.relog_offtime = 5
If you have not performed any actions via
web user interface during 5 minutes, you will
be forced to log out and have to be
authenticated again by re-entering username
and password.
The default value is 5.
It takes effect after a reboot.
Features->General
Information->Auto-Logout Time
(1~1000min)
features.direct_ip_call_enable
0 or 1
It enables or disables the IP phone to place a
call using the IP address.
Features->General Information->
Allow IP Call
Summary of Contents for SIP-T23
