Yealink SIP-T23, Provisioning Manual

Page: 132 / 321

Yealink IP Phones Auto Provisioning Guide
128
Parameter
Permitted
Values
Descriptions Web Setting Path
If you want the IP phone to play tones once,
add an exclamation mark “!” before tones
(e.g., !250/200, 0/1000, 200+300/500,
600+700+800+1000/2000).
The default value is blank.
Note: It works only if the value of the
parameter “voice.tone.country” is set to
Custom.
voice.tone.ring String
It customizes the ringback tone.
The value format is Freq/Duration. For more
information on the value format, refer to the
parameter “voice.tone.dial”.
The default value is blank.
Note: It works only if the value of the
parameter “voice.tone.country” is set to
Custom.
Settings->Tones->Ring Back
voice.tone.busy String
It customizes the tone when the callee is busy.
The value format is Freq/Duration. For more
information on the value format, refer to the
parameter “voice.tone.dial”.
The default value is blank.
Settings->Tones->Busy