Appendix
125
Parameter
Permitted
Values
Descriptions
Web Setting Path
voice.jib.adaptive
0 or 1
It configures the type of jitter buffer.
0-Fixed
1-Adaptive
The default value is 1.
For more information on jitter buffer, refer to
Yealink IP Phones Administrator Guide.
Settings->Voice->JITTER BUFFER->
Type
voice.jib.min
Integer from 0
to 400
It configures the minimum delay time (in
milliseconds) of jitter buffer.
The default value is 60.
Note: It works only if the value of the
parameter “voice.jib.adaptive” is set to 1
(Adaptive).
Settings->Voice->JITTER BUFFER->
Min Delay
voice.jib.max
Integer from 0
to 400
It configures the maximum delay time (in
milliseconds) of jitter buffer.
The default value is 240.
Note: It works only if the value of the
parameter “voice.jib.adaptive” is set to 1
(Adaptive).
Settings->Voice->JITTER BUFFER->
Max Delay
voice.jib.normal
Integer from 0
to 400
It configures the normal delay time (in
milliseconds) of jitter buffer.
Settings->Voice->JITTER BUFFER->
Normal
Summary of Contents for SIP-T23
