Yealink IP Phones Auto Provisioning Guide
208
Parameter
Permitted
Values
Descriptions
Web Setting Path
call on the IP phone.
If it is set to 1 (Enabled), the IP phone will
automatically answer the intercom call while
there is already an active call on the IP phone
and place the active call on hold.
The default value is 0.
Note: It works only if the value of the
parameter “features.intercom.allow” is set to
1 (Enabled).
features.hotline_number
String within
32 characters
It configures the hotline number that the IP
phone automatically dials out when lifting the
handset, pressing the speakerphone key or
the line key. Leaving it blank disables hotline
feature.
The default value is blank.
Features->General Information->
Hotline Number
features.hotline_delay
Integer from 0
to 10
It configures the waiting time (in seconds) for
the IP phone to automatically dial out the
hotline number.
If it is set to 0 (0s), the IP phone will
immediately dial out the preconfigured
hotline number when you lift the handset,
press the speakerphone key or press the line
Features->General Information->
Hotline Delay (0~10s)
Summary of Contents for SIP-T23
