Yealink SIP-T23, Provisioning Manual

Page: 102 / 321

Yealink IP Phones Auto Provisioning Guide
98
Parameter
Permitted
Values
Descriptions Web Setting Path
parameter “network.cdp.enable” is set to 1
(Enabled).
network.span_to_pc_port 0 or 1
It enables or disables the IP phone to span
data packets received from the WAN
(Internet) port to the PC (LAN) port. If it is
enabled, all packets from WAN port can be
received by PC port.
0-Disabled
1-Enabled
The default value is 0.
It takes effect after a reboot.
Network->Advanced->Span to
PC->Span to PC Port
sip.reg_surge_prevention
Integer from 0
to 60
It configures the waiting time (in seconds) for
account register after startup.
The default value is 0.
It takes effect after a reboot.
Network->Advanced->Registration
Random->Registration Random
(0~60s)
sip.send_response_by_request 0 or 1
It configures where the IP phone retrieves the
destination address for response. The IP
phone will then send all SIP response
messages to the destination address.
0-from VIA header in the request message
1-from source address of the request