Yealink SIP-T23 Provisioning Manual Download

Page: 34 / 321

Yealink IP Phones Auto Provisioning Guide

Configure the wait time in the Wait Time (0~100s) field.

The default value is 5.

Click Confirm to accept the change.

When Zero Touch is enabled, there will be a configuration wizard during startup:

Press the OK soft key.

The network parameters are configurable via phone user interface:

Press the Next soft key after finishing network settings.

Configure the provisioning server address, authentication user name (optional) and
password (optional) in the Auto Provision screen.

Summary of Contents for SIP-T23


































































































































































































































































































































Search results

Summary of Contents for SIP-T23

Reviews:

Related manuals for SIP-T23

Brands by name

Popular brands

Yealink SIP-T23, Provisioning Manual

Search results

Summary of Contents for SIP-T23

Reviews:

Related manuals for SIP-T23

Brands by name

Popular brands