Yealink SIP-T23 Provisioning Manual Download

Page: 81 / 321

Appendix

Fill the provisioning server address in the input field.

Click the OK button to finish setting a custom option.

Click to save the change.

If you have installed the Cool Edit application, double click to open it. Otherwise, you
can download the installation package online:

http://www.toggle.com/lv/group/view/kl36218/Cool_Edit_Pro.htm

and install it.

To customize a ring tone using Cool Edit Pro:

Open the Cool Edit Pro application.

Click File to open an audio file.

Locate the ring tone file, click Open, the file is uploaded as follows.

Summary of Contents for SIP-T23


































































































































































































































































































































Search results

Summary of Contents for SIP-T23

Reviews:

Related manuals for SIP-T23

Brands by name

Popular brands

Yealink SIP-T23, Provisioning Manual

Search results

Summary of Contents for SIP-T23

Reviews:

Related manuals for SIP-T23

Brands by name

Popular brands