Yealink SIP-T23, Provisioning Manual

Page: 112 / 321

Yealink IP Phones Auto Provisioning Guide
108
Parameter
Permitted
Values
Descriptions Web Setting Path
The default value is 1.
Note: The old parameter
“auto_provision.mode” is also applicable to
IP phones.
auto_provision.pnp_enable 0 or 1
It enables or disables Plug and Play (PnP)
feature. If it is enabled, the IP phone will
broadcast PnP SUBSCRIBE messages to
request a provisioning server address after
startup.
0-Disabled
1-Enabled
The default value is 1.
Settings->Auto Provision->PNP Active
auto_provision.weekly.enable 0 or 1
It enables or disables the IP phone to perform
an auto provisioning process weekly.
0-Disabled
1-Enabled
The default value is 0.
Settings->Auto provision->Weekly
auto_provision.weekly.dayofweek
0,1,2,3,4,5,6
or a
combination
of these
It configures the days of the week for the IP
phone to perform an auto provisioning
process weekly.
0-Sunday
Settings->Auto provision->Day of
week