Appendix
97
Parameter
Permitted
Values
Descriptions
Web Setting Path
The default value is 1.
It takes effect after a reboot.
network.lldp.packet_interval
Integer from 1
to 3600
It configures the interval (in seconds) for the IP
phone to send the LLDP request.
The default value is 60.
It takes effect after a reboot.
Note: It works only if the value of the
parameter “network.lldp.enable” is set to 1
(Enabled).
Network->Advanced->LLDP->Packet
Interval (1~3600s)
network.cdp.enable
0 or 1
It enables or disables CDP feature on the IP
phone.
0-Disabled
1-Enabled
The default value is 0.
It takes effect after a reboot.
Network->Advanced->CDP->Active
network.cdp.packet_interval
Integer from 1
to 3600
It configures the interval (in seconds) for the IP
phone to send the CDP request.
The default value is 60.
It takes effect after a reboot.
Note: It works only if the value of the
Network->Advanced->CDP->Packet
Interval (1~3600s)
Summary of Contents for SIP-T23
