Yealink SIP-T23, Provisioning Manual

Page: 186 / 321

Yealink IP Phones Auto Provisioning Guide
182
Parameter
Permitted
Values
Descriptions Web Setting Path
1-Enabled
The default value is 0.
For more information, refer to
Yealink IP
Phones XML Browser Developer's Guide.
features.action_uri_limit_ip
IP address or
any
It configures the IP address of the server from
which the IP phone receives the action URI
requests.
Multiple IP addresses are separated by
commas.
If it is set to any, the IP phone will receive
action URI requests from any server.
If it is left blank, the IP phone will reject action
URI requests.
The default value is blank.
For more information, refer to
Yealink IP
Phones Administrator Guide.
Features->Remote Control->Action
URI allow IP List
features.show_action_uri_option 0 or 1
It enables or disables the phone to pop up the
Allow Remote Control prompt when it
receives the action URI requests.
0-Disabled
1-Enabled