Appendix
179
Parameter
Permitted
Values
Descriptions
Web Setting Path
phones Administrator Guide.
auto_redial.enable
0 or 1
It enables or disables the IP phone to
automatically redial the dialed number when
the callee is temporarily unavailable.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone will dial
the previous dialed out number automatically
when the dialed number is temporarily
unavailable.
The default value is 0.
Features->General
Information->Auto Redial
auto_redial.interval
Integer from 1
to 300
It configures the interval (in seconds) for the IP
phone to wait between redials.
The IP phone redials the dialed number at
regular intervals till the callee answers the
call.
The default value is 10.
Features->General
Information->Auto Redial Interval
(1~300s)
auto_redial.times
Integer from 1
to 300
It configures the auto redial times when the
callee is temporarily unavailable.
The IP phone tries to redial the callee as many
times as configured till the callee answers the
Features->General
Information->Auto Redial Times
(1~300)
Summary of Contents for SIP-T23
