Yealink SIP-T23 Provisioning Manual Download

Page: 320 / 321

Yealink IP Phones Auto Provisioning Guide

316

LED Status

Description

The monitored user does not exist.

Line key LED (configured as a BLF/BLF list key and BLF LED Mode is set to 3)

LED Status

Description

Fast flashing green
(200ms)

The monitored user receives an incoming call.

Solid green

The monitored user is dialing.
The monitored user is talking.
The monitored user’s conversation is placed on hold.

Slow flashing green (1s)

The call is parked against the monitored user’s phone
number.

Off

The monitored user is idle.
The monitored user does not exist.

Summary of Contents for SIP-T23


































































































































































































































































































































Search results

Summary of Contents for SIP-T23

Reviews:

Related manuals for SIP-T23

Brands by name

Popular brands

Yealink SIP-T23, Provisioning Manual

Search results

Summary of Contents for SIP-T23

Reviews:

Related manuals for SIP-T23

Brands by name

Popular brands