Appendix
205
Parameter
Permitted
Values
Descriptions
Web Setting Path
1-Enabled
If it is set to 1 (Enabled), the IP phone will
perform an audible indicator when receiving
a new incoming call during a call.
The default value is 1.
Note: It works only if the value of the
parameter “call_waiting.enable” is set to 1
(Enabled).
call_waiting.on_code
String within
32 characters
It configures the call waiting on code to
activate the server-side call waiting feature.
The IP phone will send the call waiting on
code to the server when you activate call
waiting feature on the IP phone.
The default value is blank.
Features->General Information->Call
Waiting On Code
call_waiting.off_code
String within
32 characters
It configures the call waiting off code to
deactivate the server-side call waiting
feature. The IP phone will send the call
waiting off code to the server when you
deactivate call waiting feature on the IP
phone.
The default value is blank.
Features->General Information->Call
Waiting Off Code
Summary of Contents for SIP-T23
