Yealink IP Phones Auto Provisioning Guide
180
Parameter
Permitted
Values
Descriptions
Web Setting Path
call.
The default value is 10.
zero_touch.enable
0 or 1
It enables or disables zero touch for the IP
phone to configure the network parameters
and provisioning server address via phone
user interface during startup.
0-Disabled
1-Enabled
The default value is 0.
For more information, refer to
Zero Touch
on
page
29
.
Settings->Auto Provision->Zero
Active
zero_touch.wait_time
Integer from 1
to 100
It configures the duration time (in seconds) for
the IP phone to display Zero Touch screen
during startup. You can press the OK soft key
to enter configuration screen or the Cancel
soft key to return to the idle screen.
The default value is 5.
Settings->Auto Provision->Wait Time
(1~100s)
zero_touch.network_fail_wait_times
Integer
greater than1
It configures the reconnection times when
zero touch module fails to obtain network
parameters.
The default value is 5.
Summary of Contents for SIP-T23
