Yealink SIP-T23, Provisioning Manual

Page: 111 / 321

Appendix
107
Parameter
Permitted
Values
Descriptions Web Setting Path
0-Put
1-Post
The default value is 0.
Note: It works only if the value of the
parameter “auto_provision.custom.sync” is
set to 1 (Enabled).
auto_provision.reboot_force.enable 0 or 1
It enables or disables the IP phone to reboot
after auto provisioning when there is no
specific configuration requiring a reboot. It is
especially useful when there is no specific
configuration requiring reboot in the
configuration files, but you want to force the IP
phone to reboot after auto provisioning.
0-Disabled
1-Enabled
The default value is 0.
auto_provision.power_on 0 or 1
It enables or disables the IP phone to perform
an auto provisioning process when powered
on.
0-Disabled
1-Enabled
Settings->Auto Provision->Power On