Yealink IP Phones Auto Provisioning Guide
212
Parameter
Permitted
Values
Descriptions
Web Setting Path
If it is set to 0 (Disabled), the IP phone will
perform the transfer as normal when pressing
the transfer key during a call.
If it is set to 1 (Enabled), the IP phone will
transmit the designated DTMF digits to the
server for performing call transfer when
pressing the transfer key during a call.
The default value is 0.
features.dtmf.transfer
String within
32 characters
It configures the DTMF digits to be
transmitted to perform call transfer. Valid
values are: 0-9, *, # and A-D.
Note: It works only if the value of the
parameter “features.dtmf.replace_tran” is set
to 1 (Enabled).
The default value is blank.
Features->General Information->Tran
Send DTMF
features.dtmf.volume
Integer from
-10 to -2
It configures the frequency level of DTMF
digits (in db).
The default value is -10.
features.dtmf.duration
Integer from
40 to 300
It configures the duration time (in
milliseconds) for DTMF.
The default value is 80.
Summary of Contents for SIP-T23
