Configuring a TFTP Server
27
Yealink IP phones support using FTP, TFTP, HTTP and HTTPS protocols to download
configuration files. You can use one of these protocols for provisioning. The TFTP protocol
is used by default. The following section provides instructions on how to configure a TFTP
server.
We recommend that you use 3CDaemon or TFTPD32 as a TFTP server. 3CDaemo and
TFTPD32 are free applications for Windows. You can download 3CDaemon online:
http://www.oldversion.com/3Com-Daemon.html
and TFTPD32 online:
http://tftpd32.jounin.net/
.
For more information on how to configure FTP and HTTP servers, refer to
Configuring an
FTP Server
on page
63
and
Configuring an HTTP Server
on page
67
.
To prepare a root directory:
1.
Create a TFTP root directory on the local system.
2.
Place configuration files to this root directory.
3.
Set security permissions for the TFTP directory folder.
You need to define a user or a group name, and set the permissions: read, write or
modify. Security permissions vary by organizations.
An example of configuration on the Windows platform is shown as below:
Summary of Contents for SIP-T23
