Yealink SIP-T23, Provisioning Manual

Page: 86 / 321

Yealink IP Phones Auto Provisioning Guide
82
Parameter
Permitted
Values
Descriptions Web Setting Path
network.static_dns_enable 0 or 1
It enables or disables the IP phone to use
manually configured static IPv4 DNS when the
Internet (WAN) port type for IPv4 is configured
as DHCP.
0-Disabled (use the IPv4 DNS obtained by
DHCP)
1-Enabled
The default value is 0.
It takes effect after a reboot.
Network->Basic->IPv4 Config->Static
DNS
network.internet_port.ip IPv4 address
It configures the IPv4 address when the IP
address mode is configured as IPv4 or
IPv4&IPv6, and the Internet (WAN) port type
for IPv4 is configured as Static IP Address.
The default value is blank.
It takes effect after a reboot.
Network->Basic->IPv4 Config->Static
IP Address->IP Address
network.internet_port.mask Subnet Mask
It configures the IPv4 subnet mask when the IP
address mode is configured as IPv4 or
IPv4&IPv6, and the Internet (WAN) port type
for IPv4 is configured as Static IP Address.
The default value is blank.
It takes effect after a reboot.
Network->Basic->IPv4 Config->Static
IP Address->Subnet Mask