3 - 6
INSP
ADJ
ENGINE OIL LEVEL INSPECTION
1. Start the engine, warm it up for several
minutes, and then turn off the engine and
wait for five minutes.
2. Place the machine on a level place and
hold it up on upright position by placing the
suitable stand under the engine.
3. Remove:
• Dipstick
1
4. Check:
• Oil level
Oil level should be between maximum
a
and minimum
b
marks.
Oil level is low
→
Add oil to proper level.
NOTE:
When inspecting the oil level, do not screw the
dipstick into the oil tank. Insert the gauge
lightly.
(For USA and CDN)
CAUTION:
• Do not add any chemical additives.
Engine oil also lubricates the clutch and
additives could cause clutch slippage.
• Do not allow foreign material to enter the
crankcase.
Recommended oil:
At –10 °C (10 °F) or higher
È
:
Yamalube 4 (10W-30) or SAE
10W-30 type SE/SF/SG motor
oil
At 5 °C (40 °F) or higher
É
:
Yamalube 4 (20W-40) or SAE
20W-40 type SE/SF/SG motor
oil
0
10
30
50
70
90
110 130
-20 -10
0
10
20
30
40
50
È
É
˚C
˚F
ENGINE OIL LEVEL INSPECTION
Summary of Contents for TT-R90(V)
