Yamaha TT-R90(V), Owner'S Service Manual, Page: 312 / 390

5 - 9
CHAS
FRONT WHEEL AND REAR WHEEL
Rear wheel
1. Install:
• Wheel bearing
1
• Spacer
2
• Wheel bearing
3
NOTE:
• Apply the lithium soap base grease on the oil
seal lip when installing.
• Use a socket that matches the outside diam-
eter of the race of the bearing.
• Right side of bearing shall be installed first.
CAUTION:
Do not strike the inner race of the bearing.
Contact should be made only with the outer
race.
2. Install:
• Drive chain
1
NOTE:
Push the wheel
2
forward and install the drive
chain.
2
1
3. Adjust:
• Drive chain slack
Refer to the “DRIVE CHAIN SLACK
ADJUSTMENT” section in the CHAPTER
3.
4. Install:
• Tension bar
1
• Bolt
2
• Nut
3
• Cotter pin
4
T
R
.
.
26 Nm (2.6 m · kg, 19 ft · lb)
New