R&G Racing
Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
Email:
- 1 -
FITTING INSTRUCTIONS FOR PKS0057SI KICKSTAND SHOE
MV Augusta F4 1000 ’04-
Please note that the way the kit is packed does not necessarily represent the way of
mounting to the bike.
T
HE PARTS SHOWN MAY BE REPRESENTATIVE ONLY
(
FOR CLARITY OF INSTRUCTIONS ONLY
)
Please note that in cases where kits are packed with rubber washers holding the components onto the
bolt –
the rubber washers should be thrown away
!
BASE PLATE CLAMP PLATE AND BOLTS
TOOLS REQUIRED
3mm A/F Allen key.
FITTING INSTRUCTIONS
Take the aluminium base plate and fit to the base of the side stand from underneath.
Offer the clamp plate around the side stand leg and position above the aluminium base plate,
with the countersinks facing upwards.
Fit the three M5 bolts clamping the two plates together and securely mounting onto the side
stand foot.
Tighten all bolts evenly and check to ensure the side stand pad clears the chain when in the
raised position.
If fitting to older stands that have been worn the padding strip should be placed in the base
plate to ensure a tighter fit.
