Xerox WorkCentre M24 Color Reference Manual Download Page 36

Page: 36 / 332

adi

ng D

cuments

2.2

Loading Documents

This section describes how to load documents.

2.2.1

Loading Documents on the Document
Glass

This section describes how to load documents on the document glass.

Procedure

Open the document cover.

Place the document face down, align-
ing the corner with the upper left-hand
side corner of the document glass.

Place a sheet of white paper on top of transparencies
and other highly transparent documents.

Close the document cover.

When transmitting a thick document, do
not use excessive force to press it against
the document glass. The glass could
break and cause injury.

When scanning with the document cover
open, avoid looking directly at the copy
lamp as this may cause eye fatigue or
strain.

Summary of Contents for WorkCentre M24 Color













































































































































































































































































































































Search results

Summary of Contents for WorkCentre M24 Color

Reviews:

Related manuals for WorkCentre M24 Color

Brands by name

Popular brands

Xerox WorkCentre M24 Color, Reference Manual

Search results

Summary of Contents for WorkCentre M24 Color

Reviews:

Related manuals for WorkCentre M24 Color

Brands by name

Popular brands