Xerox WorkCentre M24 Color, Reference Manual

Page: 288 / 332

13.2 Setting the Environment
264
13
Using
the
In
te
rn
et
to
Send
and
Receive F
axes
■
Network Environment
Configure the following environments in the machine, server and computer
respectively.
● When receiving E-mails via SMTP
No. Settings Example Remarks
● Set the following at the Control Panel or using the Internet Services.
1 IP address xxx.xxx.xxx.xxx Auto setting by DHCP is not
available. Be sure to allo-
cate a fixed address.
2 Subnet mask xxx.xxx.xxx.xxx Set the following settings as
required.
3 Gateway address xxx.xxx.xxx.xxx Set the following settings as
required.
● Start up the computer and set up with the Internet Services.
4 Host name dcc400 If the sender has specified
the IP address, the settings
for host name are not nec-
essary.
5 DNS server address xxx.xxx.xxx.xxx You can acquire this infor-
mation from DHCP.
6 DNS domain name faxserver.xerox.com If the sender has specified
the IP address, the settings
for DNS domain name are
not necessary.
7 SMTP server address xxx.xxx.xxx.xxx Set the IP address for the
outgoing mail server.
8 Machine mail address ifax@dcc400.xerox.com
Account name: ifax
Host name: dcc400
Domain Name: xerox.com An alias cannot be set. You
can set any name for the
account (on the left side of
@). Set the address section
(on the right side of @),
with the combination of the
host name and domain
name.
"xxx" indicates the number of 0 to 255.