Xerox WorkCentre M24 Color Reference Manual Download Page 11

Page: 11 / 332

Communicating confidential
documents with a specified
person

You can send/receive documents to/from a
specified person by entering a mailbox pass-
word.

“8.14 Using the Mailbox Feature (Remote Mailbox/
Retrieve from Mailbox)” (P. 118)

Receiving documents stored
at a remote machine

“8.13 Retrieving a Document From Remote
Machine(s) (Polling)” (P. 116)

Retrieve

Sorting received docu-
ments into mailboxes

“8.15 Sorting Received Documents Into Mailbox
(Box Selector)” (P. 135)

For Support

For A

For Support

Programming commands
(requests) for mailbox

“9.6 Creating a Mailbox” (P. 173)

Printed immediately

For A

For Support

Forward

Printing Transmission Report

You can check results of transmissions on
the report.

“10.2 Printing Reports and Lists” (P. 206)

Transmission Report

Document has been sent.

Document Size A4S

Document has not been sent.

Pass this report to the sender.

Document Size A4S

Transmission Report-Undelivered

Summary of Contents for WorkCentre M24 Color













































































































































































































































































































































Search results

Summary of Contents for WorkCentre M24 Color

Reviews:

Related manuals for WorkCentre M24 Color

Brands by name

Popular brands

Xerox WorkCentre M24 Color, Reference Manual

Search results

Summary of Contents for WorkCentre M24 Color

Reviews:

Related manuals for WorkCentre M24 Color

Brands by name

Popular brands