24
NOS Selection
TCP/IP Protocol Configuration
To view or change the settings of the Device's TCP/IP Protocol Configuration, perform the following steps:
To access the TCP/IP Protocol Settings at the Device
1.
Press the
Log In / Out button
on the Control Panel.
2.
Press the
"1" key
on the numeric keypad five consecutive times. (This is the factory default
"password.")
3.
Press
Enter
on the touch screen.
4.
Press the
Machine Status button
on the Control Panel.
5.
Press the
Tools tab
.
6.
Press
Connectivity & Network Setup
.
7.
Press
Protocol Settings
.
8.
When the Protocol Settings menu displays, note that with the exception of selection one (Ethernet
Rated Speed), the remaining selections are specific to TCP/IP address settings. Choose your setting
of interest by pressing the numbered, horizontal selection line on the touch screen. Note that the
current status of each setting is shown on the applicable line. After pressing a selection line, to access
available settings press the
Change Settings
button in the lower right corner of the touch screen.
Summary of Contents for WorkCentre 7335
Page 1: ...System Administrator s Guide 701P47693 WorkCentre 7328 7335 7345...
Page 12: ...x...
Page 300: ...701P47693...
