Xerox WorkCentre 7335 System Administrator Manual Download Page 179

Page: 179 / 300

167

Testing Network Scanning (using templates)

Go to the machine and press the

All Services button

Press the

Network Scanning

button.

See if the template you created is displayed on screen.

If it is, press it. If it is not, return to the beginning of this section and repeat the required procedures.

Place a document in the document handler and press the

Start button

located to the immediate right

of the Control Panel’s numeric keypad.

On a network-connected PC, open a connection to the repository server, log in, and see if the
document arrived in the repository folder.

Summary of Contents for WorkCentre 7335













































































































































































































































































































Search results

Summary of Contents for WorkCentre 7335

Reviews:

Related manuals for WorkCentre 7335

Brands by name

Popular brands

Xerox WorkCentre 7335, System Administrator Manual

Search results

Summary of Contents for WorkCentre 7335

Reviews:

Related manuals for WorkCentre 7335

Brands by name

Popular brands