26
IPv4 IP Address
1.
Used for static IP Addressing (with "STATIC" selected as your addressing method), on the Protocol
Settings menu, press the selection line labeled
IPv4 Address
. Note that the IP Address may be
viewed, but not changed, with dynamic addressing enabled.
2.
Press the
Change Settings
button.
3.
On the settings screen, use the numeric keypad to enter in the appropriate IP Address.
4.
To save settings, press the
Save
button.
5.
To exit the screen, without making any changes, press the
Cancel
button.
IPv4 Subnet Mask
1.
Used for static IP Addressing (with "STATIC" selected as your addressing method), on the Protocol
Settings menu, press the selection line labeled
IPv4 Subnet Mask
. Note that the Subnet Mask may
be viewed, but not changed, with dynamic addressing enabled.
2.
Press the
Change Settings
button.
3.
On the settings screen, use the numeric keypad to enter in the appropriate Subnet Mask.
4.
To save settings, press the
Save
button.
5.
To exit the screen, without making any changes, press the
Cancel
button.
IPv4 Gateway Address
1.
Used for static IP Addressing (with "STATIC" selected as your addressing method), on the Protocol
Settings menu, press the selection line labeled
IPv4 Gateway Address
. Note that the Gateway
address may be viewed, but not changed, with dynamic addressing enabled.
2.
Press the
Change Settings
button.
3.
On the settings screen, use the numeric keypad to enter in the appropriate Gateway.
4.
To save settings, press the
Save
button.
5.
To exit the screen, without making any changes, press the
Cancel
button.
Summary of Contents for WorkCentre 7335
Page 1: ...System Administrator s Guide 701P47693 WorkCentre 7328 7335 7345...
Page 12: ...x...
Page 300: ...701P47693...
