53
NetBIOS over IP Client/Server Printing
Before You Start
1.
Obtain the Print Driver for your workstation's operating system. Drivers are available on one of the
CD-ROMs that came with your Device. They are also typically available for downloading in self-
extracting Zip file format from the Internet at www.xerox.com.
2.
Print a
Configuration Report
as stated under the
Network Connectivity Tab
of this guide.
3.
On the Configuration Report,
verify that "SMB" is enabled
. Also,
verify that TCP/IP is enabled
as
one of the supported protocols. To enable "SMB," if required, follow the procedure stated under the
Microsoft (NetBIOS over IP) item of the NOS Selection menu, accessed from the
Network
Connectivity Tab
of this guide.
4.
The Workstation Print Driver Installation Procedures below ASSUME that you have already Set Up a
Server to Queue Jobs to the Printer. If you have NOT already set up a Server, for a quick-step set up
procedure, refer to the instructions supplied under the selection "Microsoft (NetBIOS over IP)," located
in the
NOS Selection
menu, under the
Network Connectivity Tab
of this guide.
Summary of Contents for WorkCentre 7335
Page 1: ...System Administrator s Guide 701P47693 WorkCentre 7328 7335 7345...
Page 12: ...x...
Page 300: ...701P47693...
